RRB Technician Free Mock Test
RRB Technician (Railway Technician) is part of India's Government Exams category, covering 6 topics. Kamiyab provides free RRB Technician mock tests with no signup or payment — two modes: Quick Practice (10 questions in ~10 minutes for daily topic-wise revision) or Full Mock (up to 100 questions matched to the official exam pattern). Both include instant scoring and per-question explanations. Eligibility: ITI / 10th. Aligned to the current 2026 official syllabus.
RRB Technician mock test modes — at a glance
| Mode | Questions | Time | Best for | Cost |
|---|---|---|---|---|
| Quick Practice | 10 | ~10 minutes | Daily topic-wise warm-up | ₹0 (Free) |
| Full Mock | Up to 100 | ~2 hours | Pre-exam revision, full exam pattern | ₹0 (Free) |
Test mode
100 Qs · 60 minPick a topic
Start with MathematicsAbout RRB Technician — Grade I (Signal) and Grade III recruitment
The RRB Technician examination recruits technical staff for Indian Railways across two distinct grades — Grade III (a 10th-pass + ITI based trade Technician role across Mechanical, Electrical and S&T departments) and Grade I (Signal) (a 12th + Math/Physics/Chemistry or Diploma-based engineering role specifically for the Signal & Telecommunication department). Both grades share the same CBT 1 but diverge sharply at CBT 2.
Grade III hires Technicians for ITI trades such as Fitter, Electrician, Wireman, Welder, Carpenter, AC Mechanic, Electronics Mechanic, Instrument Mechanic and similar — these are field maintenance roles in railway depots, workshops, electrical loco sheds and S&T installations. Grade I (Signal) is a specialised role for installing, maintaining and troubleshooting railway signalling and telecommunication equipment — relay interlocking, axle counters, point machines, optical fibre and railway communication networks.
The exam runs as two computer-based stages — CBT 1 (common, screening) and CBT 2 (grade-specific). For Grade III, CBT 2 has a Part A (general aptitude + basic engineering) and a Part B (trade-specific, qualifying at 35%). For Grade I (Signal), CBT 2 is a single fully disciplinary paper on Signal & Telecommunication Engineering. CBT 1 and CBT 2 Part A both carry negative marking of 1/3 per wrong answer. Final stages are Document Verification and Medical (C-1/C-2 standard for Grade III; B-1/B-2 for Grade I Signal).
Conducted by: Railway Recruitment Boards (RRBs), Ministry of Railways
Eligibility
Technician Grade III (ITI route)
- Age:
- 18-33 years as on the cut-off date. Age relaxation: SC/ST +5 yrs, OBC-NCL +3 yrs, PwBD +10 yrs (UR) / +13 yrs (OBC) / +15 yrs (SC/ST), Ex-Servicemen as per rules.
- Education:
- 10th-pass (Matriculation / SSLC) from a recognised Board PLUS ITI / NAC certificate in the relevant trade notified for the post (e.g., Fitter, Electrician, Wireman, Welder, Carpenter, AC Mechanic, Electronics Mechanic, Instrument Mechanic, etc.) issued by NCVT / SCVT.
- Nationality:
- Indian citizen, or subject of Nepal/Bhutan, or Tibetan refugee who came to India before 1 Jan 1962, or person of Indian origin from specified countries.
Technician Grade I (Signal) — 10+2 route
- Age:
- 18-36 years as on the cut-off date (varies slightly by notification). Standard age relaxations apply.
- Education:
- 10+2 (Intermediate / Class 12) with Physics, Chemistry and Mathematics as subjects, with a minimum of 50% marks in aggregate from a recognised Board.
- Nationality:
- Same as above.
Technician Grade I (Signal) — Diploma route
- Age:
- 18-36 years as on the cut-off date. Standard age relaxations apply.
- Education:
- 3-year Diploma in Engineering from a recognised institution in one of: Electronics / Electrical / Instrumentation / Communication / Computer / Information Technology / their allied branches (as specified in the notification).
- Nationality:
- Same as above.
Exam Pattern
Stage-by-stage breakdown of the recruitment process.
CBT 1 — Computer Based Test (Common screening for both grades)
- Mode
- Online CBT
- Sections
- Mathematics · General Intelligence & Reasoning · General Science · General Awareness & Current Affairs
- Questions
- 100
- Marks
- 100 (1 mark per correct)
- Duration
- 90 minutes (60 minutes for PwBD with scribe)
- Negative marking
- -1/3 mark per wrong answer
Same paper for both Grade III and Grade I (Signal) candidates. Used purely to shortlist for CBT 2 — marks are normalised across shifts. Section weightage is roughly Math 25 + Reasoning 25 + GS 40 + GA 10.
CBT 2 (Grade III) — Part A + Part B
- Mode
- Online CBT
- Sections
- Part A: Mathematics · General Intelligence & Reasoning · Basic Science & Engineering · General Awareness. Part B: Trade-specific (per ITI trade applied for — Fitter, Electrician, Wireman, etc.)
- Questions
- Part A: 100 questions · Part B: 75 questions
- Marks
- Part A: 100 marks · Part B: 75 marks
- Duration
- Part A: 90 minutes · Part B: 60 minutes (total 2h 30m)
- Negative marking
- -1/3 mark per wrong answer in Part A only. Part B is qualifying.
Part B is qualifying — minimum 35% required (30% for SC/ST/OBC-NCL/PwBD as per relaxation). Final merit is decided on Part A score only; Part B only needs to be cleared.
CBT 2 (Grade I Signal) — Single disciplinary paper
- Mode
- Online CBT
- Sections
- Signal & Telecommunication Engineering only — fully disciplinary, no general / aptitude sections.
- Questions
- 100 (indicative; refer to notification)
- Marks
- 100
- Duration
- 90 minutes
- Negative marking
- -1/3 mark per wrong answer
Unlike Grade III, the Grade I Signal CBT 2 has no Part A / Part B split — the entire paper is disciplinary Signal & Telecom engineering at 10+2 / Diploma level.
Document Verification & Medical Examination
- Mode
- Document check + medical fitness
- Sections
- Educational certificates, ITI / Diploma / 10+2 marksheets, ID, category proof, medical fitness
- Questions
- —
- Marks
- —
- Duration
- —
- Negative marking
- —
Grade III is typically classified as medical category C-1 / C-2 (depending on department). Grade I (Signal) is B-1 / B-2 — stricter eyesight standards because signalling work is safety-critical.
Syllabus
Tap any section to see the full list of subtopics.
Mathematics (CBT 1 + CBT 2 Part A)13 topics
- Number system — natural, whole, integers, rational, irrational, real
- Simplification using BODMAS
- Percentage and applications
- Profit & loss, discount, marked price
- Simple interest and compound interest
- Ratio & proportion, partnership
- Average and weighted average
- Time & work, pipes & cisterns
- Time, speed & distance, trains, boats & streams
- Mensuration — perimeter, area, surface area, volume of standard shapes
- Elementary algebra (linear equations, basic identities)
- Basic geometry (triangles, circles, quadrilaterals — properties)
- Statistics — mean, median, mode, basic data interpretation
General Intelligence & Reasoning (CBT 1 + CBT 2 Part A)12 topics
- Number / letter / alphanumeric series
- Coding-decoding (letter shift, number based)
- Analogies — word, number, symbol
- Classification / odd-one-out
- Blood relations (single + two-step)
- Direction sense and distance
- Mathematical / arithmetic operations on symbols
- Ranking and order arrangement
- Basic syllogism (2 statements, 2 conclusions)
- Venn diagrams (2-set, 3-set)
- Statement & assumptions / conclusions (basic)
- Non-verbal — mirror image, water image, paper folding
General Science (CBT 1)4 topics
- Physics — motion (kinematics, Newton's laws), work-energy-power, heat, light (reflection, refraction, lenses), sound, electricity (current, voltage, Ohm's law), magnetism basics
- Chemistry — matter, atomic structure, periodic table basics, acids/bases/salts, common compounds and formulas, metals & non-metals
- Biology — cell structure, plant and animal tissues, human body systems (digestive, respiratory, circulatory, nervous), diseases and vitamins, ecology basics
- NCERT Class 10 level depth
General Awareness & Current Affairs (CBT 1 + CBT 2 Part A)7 topics
- Indian History — Ancient, Medieval, Modern, freedom struggle highlights
- Indian Geography — physical features, rivers, climate, agriculture, mineral belts
- Indian Polity — Constitutional basics, Fundamental Rights and Duties, Parliament, Judiciary
- Indian Economy — basic concepts, RBI, budget, schemes
- Static GK — sports, awards, books and authors, important days, monuments
- Indian Railways general — zones, divisions, types of trains, gauge, Railway Board
- Current Affairs — last 6-12 months (national, international, sports, awards, science & tech)
Basic Science & Engineering (CBT 2 Part A — Grade III)11 topics
- Engineering Drawing — views, projections, scale, symbols
- Units & Measurements — SI units, conversions, dimensions
- Mass, weight and density; specific gravity
- Work, power and energy — basic formulas and unit conversions
- Speed, velocity, acceleration — basic kinematics
- Heat and temperature — thermometers, expansion, calorimetry basics
- Basic electricity — current, voltage, resistance, Ohm's law, series/parallel circuits, power consumption
- Levers and simple machines — mechanical advantage, classes of levers
- Occupational safety and health — workshop and depot safety
- Environmental education — pollution, waste, conservation basics
- IT Literacy — computer fundamentals, MS Office basics, internet basics
Trade / Engineering Discipline (CBT 2 Part B — Grade III · or full CBT 2 — Grade I Signal)8 topics
- Grade III trade-specific — Fitter: workshop tools, measuring instruments (vernier caliper, micrometer, dial gauge), fits & tolerances, drilling, filing, grinding, basic fitting operations
- Grade III trade-specific — Electrician: AC/DC fundamentals, transformers (single & three-phase), DC and AC motors, starters, domestic + industrial wiring, earthing, illumination
- Grade III trade-specific — Wireman: domestic and industrial wiring schemes, cable types and sizing, earthing systems, common circuit faults and remedies, IE rules basics
- Grade III trade-specific — Welder / AC Mechanic / Electronics Mechanic / Instrument Mechanic: standard NCVT trade syllabus for each specialisation
- Grade I (Signal) — Basic Signalling: semaphore vs colour-light signals, absolute block system, automatic block signalling, route relay interlocking, electronic interlocking
- Grade I (Signal) — Axle counters, track circuits, point machines, signal aspects and indications
- Grade I (Signal) — Telecommunication: railway communication networks, optical fibre basics, microwave and VHF links, train radio (GSM-R), control circuit basics
- Grade I (Signal) — Basic electronics: semiconductors, diodes, transistors, OP-amps, digital logic, power supplies
Preparation Strategy
Decide your grade FIRST — Grade III (ITI) and Grade I (Signal) have completely different CBT 2 papers. Grade III needs trade-specific revision (Fitter / Electrician / Wireman / etc.); Grade I Signal needs disciplinary Signal & Telecom prep. CBT 1 is the same for both, so build that base first.
CBT 1 is just a screening — but it's a sharp cut-off. Aim for 75+ out of 100 by drilling Math, Reasoning, General Science (NCERT 10) and basic Indian + Railway GA. The questions are 10th-pass level but volume is heavy at 100 questions in 90 minutes.
For Grade III Part B (trade): revisit your NCVT / SCVT ITI syllabus book for your trade — questions repeat from the standard syllabus. Part B is qualifying at 35% (30% for reserved) and is NOT counted in final merit, so don't over-invest. Just clear it cleanly.
For Grade III final merit, Part A is everything. Use the same 1/3 negative marking rule — solve only what you're sure of. Math + Reasoning are scoring; GA needs daily Railway-themed current affairs.
For Grade I (Signal), use a Signal & Telecom textbook (Sharma & Gupta is a common reference) plus standard electronics texts for semiconductor / digital logic basics. Past disciplinary papers (RRB JE S&T) are very useful — the depth is similar.
Solve at least 3-5 past RRB Technician / ALP / JE papers under timed conditions. The Reasoning and Math patterns repeat heavily — series, coding, percentages, profit-loss, time-work, basic mensuration appear every year.
Recent Changes to Know
- The 2024 notification consolidated recruitment into TWO clear grades — Grade III (10th + ITI) and Grade I (Signal) (10+2 PCM or Diploma). Earlier 'Technician Gateman' / 'Technician (Workshop)' style splits have been streamlined under these two umbrellas.
- CBT 1 is COMMON across both grades — same paper, same syllabus, same 90-minute window. The grade differentiation kicks in at CBT 2.
- Grade III CBT 2 follows ALP-style Part A + Part B structure. Part B is QUALIFYING (35% / 30% for reserved) — it doesn't add to final merit, but failing it disqualifies you.
- Grade I (Signal) CBT 2 is FULLY DISCIPLINARY — no general aptitude / GA section. The entire paper is Signal & Telecommunication engineering at 10+2 PCM or Diploma level.
- Negative marking is 1/3 mark per wrong answer in CBT 1 and CBT 2 Part A (and Grade I Signal CBT 2). Grade III Part B has no negative marking but is qualifying only.
- Application fee remains ₹500 for UR/OBC and ₹250 for SC/ST/PwBD/Women/Ex-Servicemen, with partial refund (₹400 / ₹250 respectively) on appearing in CBT 1.
Important Dates
- Notification
- Typically released once every 2-3 years; latest cycles around 2024-25
- Exam
- CBT 1: 2-3 months after application close · CBT 2: 2-3 months after CBT 1 result · DV & Medical: 1-2 months after CBT 2 result
- Results
- CBT 1 result usually within 1-2 months of exam · CBT 2 result within 2 months · Final panel after DV and Medical
RRB Technician notifications are irregular — they don't follow an annual cycle like SSC. Always check the regional RRB website (rrbcdg.gov.in or your zonal RRB) for the current cycle's exact dates.
Widely-Used Reference Books
Popular books many aspirants use — pick what fits your level.
- RS Aggarwal — Quantitative Aptitude (for Math)
- RS Aggarwal — Verbal & Non-Verbal Reasoning
- Lucent's General Knowledge (for GA + Static GK)
- Lucent's General Science (NCERT-level Physics, Chemistry, Biology summary)
- Kiran Publications — RRB Technician / ALP Previous Year Papers
- NCERT Class 9 & 10 — Science & Mathematics (foundation)
- Disha Publications — RRB Technician Guide
- NCVT ITI Trade Theory book (for the trade you applied in — Grade III Part B)
- BL Theraja — Electrical Technology Vol. 1 & 2 (for Electrician trade and Grade I Signal electronics base)
- Sharma & Gupta — Telecommunications / Signal Engineering (for Grade I Signal CBT 2)
- Manorama Yearbook (current affairs reference)
RRB Technician mock test — frequently asked questions
Is the RRB Technician mock test on Kamiyab really free?
Yes, completely free. No signup, no payment and no hidden charges — every RRB Technician practice test and full mock on Kamiyab is free to use.
Do I need to create an account to attempt the RRB Technician mock test?
No. You can start any RRB Technician quick practice or full mock without signing up. Just pick a topic and begin.
How many questions are there in the RRB Technician mock test?
Quick Practice gives you a focused 10-question, ~10-minute test on a single topic. Full Mock is a longer paper of up to 100 questions built to match the RRB Technician exam pattern and timing.
Which subjects and topics are covered for RRB Technician?
6 topics are covered for RRB Technician, including Mathematics, General Intelligence & Reasoning, General Science and more. Each topic can be practised on its own as a quick test or combined into a full-length mock.
Are the RRB Technician questions reliable and up to date with the latest syllabus?
Quick Practice questions are hand-curated and kept aligned with the current official RRB Technician syllabus, each with a short explanation. When the exam body revises the syllabus, the question bank is updated so you are not practising removed or out-of-syllabus topics.
Do I get the correct answers and explanations for RRB Technician?
Yes. After you submit the test, every question shows the correct option along with a short explanation, so you can review and fix weak areas immediately.
Will the RRB Technician mock test work on a low-end phone or slow connection?
Yes. Kamiyab runs in any modern mobile browser with no app install. The timer, scoring and explanations all work on basic Android phones and on slow networks.
How should I use Kamiyab to prepare for RRB Technician?
Use Quick Practice daily for topic-wise revision, then take a Full Mock to simulate the real RRB Technician timer and pressure. Read the explanations after every test and re-practise the topics where you score low.
10 minutes. 10 questions. Bas itna hi.
Koi signup nahin. Test khatam hone ke baad detailed analysis aur har question ka explanation milega.